No products in the cart.


Wet and Dry Riser Systems For Singapore Buildings

Kimty provides an one stop service from design and build, supply and installation, breeching inlet replacement, maintenance, hydrostatic testing, pump testing and certified of rising main system to QP and FSSD submission.

These systems provide easy access to water for firefighting purposes at various points across multiple storeys in a building. Where portable water or chemical supplies would be impractical, wet and dry risers enable firefighters to easily access water supplied by an external pressurised source.

The choice between a wet and a dry riser will depend on your building’s water pressure. If there is doubt that your building’s water pressure will be insufficient for firefighting purposes, a dry riser is preferred. Kimty provides landing valves suitable for use with both systems that are to be installed on every floor requiring riser access.

An inlet breeching is the point within a dry riser system at which fire and rescue services connect their own water supply. Fire engine access is required within 18 metres of the inlet. These are to be placed somewhere easily accessible in an area that provides safety and convenient building access for firefighters. Kimty offers both two and four-way inlets enabling multiple connections and higher volumes of water to be utilised.

Make an enquiry today

Our range of products and services has been chosen to provide the greatest range of choice for property-owners in Singapore. Discuss your needs with our knowledgeable staff and discover how Kimty could help you ensure your building has adequate safety equipment in the event of a fire.

Get in touch with our staff today and learn how we could ensure your property is prepared. Call us on +65 6255 3255 or send us a message through our enquiry form or via email at and we’ll get back to you as soon as possible.

PLS Listed AFFF Foam & Water Units (9kg)

Foam and Water extinguishers are commonly used for fire suppression.

However, these extinguishers are for Class A fires only – they should not be used on Class B or C. The discharge stream could spread the flammable liquid in a Class B situation or could create a shock hazard on a Class C blaze.


PLS Listed CO2 Units (2kg, 5kg)

Carbon Dioxide units extinguish fire by taking away the oxygen element and also be removing the heat with a very cold discharge.

Carbon dioxide can be used on Class B & C situations. They are usually ineffective on
Class A.


Class F Wet Chemical

Wet Chemical is a new agent that extinguishes by removing the heat element and prevents re-ignition by creating a barrier between the oxygen and fuel elements.

Wet chemical Class K extinguishers were developed for modern, high efficiency deep fat fryers in commercial cooking operations. Some may also be used on Class A situations in commercial kitchens.

Halotron Clean Agent

Halogenated or Clean Agent extinguishers is a halocarbon based firefighting solution for handheld units. They extinguish by interrupting the chemical reaction of the blaze.

Clean agent extinguishers are primarily for Class B & C fires. Some larger clean agent extinguishers can be used on Class A, B, and C blazes.


ABC/ Monnex Powder, Water and Foam Portable Units

These Marine Equipment Directive (MED) approved portable fire extinguishers have passed stringent quality control tests to be labelled with this renowned European certification.

Mobile Dry Powder Fire Extinguishers




Connect with